To flash the graphics card BIOS users can download ATI Flash.
ATI Technologies Incorporation is one of the most powerful software developers and those who work with graphic processors. Since 2007, it has become AMD Graphics Products Group subdivision and since 2010 all their production has been labeled with the AMD brand.
Before making upgrade experts advise to save the flashing provided by the manufacturer on the computer and the utility will be useful in this task. ATIFlash supports all AMD Radeon graphics cards, like RX 6900 XT, RX 6800 XT, RX 6700 XT, RX 5700, RX 5600, RX 5500 . Users can also flash the BIOS for all AMD Radeon RX Vega, RX 580, RX 480 , and all older ATI cards.
However, the main brand of ATI, Radeon, will be preserved in the names of future video cards. In addition to developing high-quality GPUs for PCs, ATI is also developing built-in GPUs for laptops, PDAs, and mobile phones, and integrated graphics solutions for motherboards, TV consoles and others.
Requirements for ATI Flash
The program ATIFlash is a proper program for mining goals. The version released by ATI is called ATI Flash or WinFlash. Users download ATI Flash and use it with ease.
How to use ATI Flash
It is recommended to disable the video card on Windows before flashing the BIOS. To do this, users need to open ‘Device Manager’ and in the point ‘Video Adapters’ select the necessary adapter and with right click disable it. There are two possible ways to use the ATI Flash utility. The first one is using its graphical interface and the second – its console version. Let’s have a closer look at both of them.
Flashing using graphical interface
The first step is to start ATI Flash with the administrator right. Make sure that the needed video adapter is selected in the upper right corner. In case there are more than three video cards, the program won’t be able to display the entire list correctly. Therefore, users need to use another way to flash the BIOS, the second one, which will be described below. Then click on the button Load Image and select the BIOS file. ‘Press Program’. Keep waiting till there is a message ‘You BIOS was programmed successfully’. To conclude, confirm restarting the system, which is necessary for the video card to work with the new BIOS.
Possible errors
- subsystem id mismatch’ shows the wrong choice for flashing or the wrong size.
- ‘adapter not found’ requires revision in ‘Device Manager’.
- ‘cannot find discrete ati video card’ can be fixed by inserting a video card directly or programing cards separately.
- failed to read rom’ indicates a wrong flashing file.
- the computer freezes after updating the BIOS of a video card. In this case, it is recommended to disable the video card before the flashing using ‘Device Manager’.
- the video card is displayed in the system, but does not work after updating the BIOS and rebooting. The reason might be new drivers that block the operation of video cards with the unsigned BIOS.
To conclude, download ATI Flash utility to run the program for flashing BIOS. The latest version is ATI Flash 2.84 that works properly on Windows 10 on a 64-bit version. In case it does not work, it is advised to download ATIFlash 2.77.
A program for flashing the BIOS of video cards based on AMD (ATI) Radeon chips for DOS.
The DOS version of ATIFlash is discontinued, the last update released in 2013 has a version number 4.17. Use ATIFlash 2.9.3 for Windows command line to flash new cards.